Kylethenile Posted April 3, 2020 Share Posted April 3, 2020 Hi, while building, I placed Carpenters Garage Doors. While they had been down, I broke blocks at the bottom. Now I can't place blocks at that position. It seems that the block space ist locked by the carpenters garage door, despite being removed completely. The problem is at the complete z height below. Can you help me? Kyle coordinates: x:3858 - 3863 z:-1011 y:66 Link to comment Share on other sites More sharing options...
Kylethenile Posted April 3, 2020 Author Share Posted April 3, 2020 Ok. I could fix it. It reacts weird. But it works again. Link to comment Share on other sites More sharing options...
ManYouForgot Posted April 4, 2020 Share Posted April 4, 2020 Glad you was able to resolve this. In my experience the garage door will extend down if you increase the Z axis, and you would then have to remove the entire door and fill in the floor to the correct height and then replace the door. Link to comment Share on other sites More sharing options...
urss333 Posted April 7, 2020 Share Posted April 7, 2020 T/C Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.