sf3 Draconic Energy ball

[Towilloughby]

This is a guide on how to make all Tiers of a  Draconic Power Ball

 

You don't have to go through each Tier just go to the one you want!

If needing help to build 

Spoiler

After getting these items you will need to place the Stabilizers around the Draconic energy Core  Then you open up one of the Energy Core Stabilizers and press "Activate"

Tier 1

Spoiler

Tier 1 Power Ball

A Tier 1 Power Ball Can hold 45,500,000

To make a tier 1 power ball you will need 

 

1 Energy Core 

4 Energy Core Stabilizers

 

After getting these items you will need to place the Stabilizers around the Draconic energy Core  Then you open up one of the Energy Core Stabilizers and press "Activate"

 

Tier 2

Spoiler

Tier 2 Power Ball 

A Tier 2 Power Ball Can hold 273,000,000

To make a tier 2 power ball you will need 

 

1 Energy core (Use the same as before if you skip Tier 1 just make a new one) 

4 Energy Core Stabilizers

6 Draconium blocks

 

After you get all of these items, You place the Stabilizers around the Energy core, Then place the Draconium blocks around the energy core of each side of the core and press activate(The energy core is inside of the draconium blocks)

Tier 3 

Spoiler

Tier 3 Power Ball

 

A Tier 3 Power Ball Can hold 1,640,000,000

To make a Tier 3 Power Ball you will need

 

1 Energy core (Use the same as before if you skip Tier 1 just make a new one) 

4 Energy Core Stabilizers

26 Draconium blocks 

 

After you get all of these items, You place the Stabilizers around the Energy core, Then place the Draconium blocks around the energy core and Press activate.

Tier 4 

Spoiler

Tier 4 Power Ball

 

A Tier 4 Power Ball Can hold 9,880,000,000

To make a Tier 4 power ball you will need

 

1 Energy core (Use the same as before if you skip Tier 1 just make a new one) 

4 Energy Core Stabilizers 

54 Draconium Blocks

26 Redstone Blocks 

 

After you got all of these items, You can place the stabilizers around the energy core, Build out for the first layer out of RedstoneBlocks Like you Do with a Tier 3 power Ball , Then you just place the draconium blocks on the Redstone Blocks, And press Activate.

Tier 5 

Spoiler

Tier 5 Power Ball 

 

A Tier 5 Power Ball Can hold 59,300,000,000

To make a Tier 5 power ball you will need 

 

1 Energy core (Use the same as before if you skip Tier 1 just make a new one) 

36 Energy Core Stabilizers 

90 Draconium Blocks  

80 Redstone Blocks 

 

After you got all of these items, You place the Stabilizers 3x3 like where they was before as shown in this screenshot 

Once you place the middle Stabilizer in it will go into a multi block, You will need to do this for all 4 sides, After doing that place down you need to replace the draconium blocks from Tier 4 build and place redstone there, After doing that you can cover all outside redstone blocks and place Draconium blocks so that you cant see redstone anymore 

Tier 6

Spoiler

Tier 6 Power Ball

 

A Tier 6 Power Ball Can hold 356,000,000,000

To make a Tier 6 Power ball you will need

 

1 Energy core (Use the same as before if you skip Tier 1 just make a new one) 

36 Energy Core Stabilizers 

150 Draconium Blocks 

178 Redstone blocks

 

After you got these items, You will need to move the Stabilizers back 4blocks So that you have enough room for your new power ball, Once you have finished moving that You will replace all the Draconium blocks again with Redstone blocks, And then cover all of the Redstone blocks 

Tier 7

Spoiler

Tier 7 Power Ball

 

A Tier 7 Power Ball Can hold 2,140,000,000,000

To make a Tier 7 Power ball you will need 

 

1 Energy core (Use the same as before if you skip Tier 1 just make a new one) 

36 Energy Core Stabilizers 

210 Draconium Blocks

328 Redstone Blocks 

 

After you got these items, You will need to replace all the Draconium blocks with redstone blocks, And do the same as the other steps and cover all the redstone in Draconium blocks

Tier 8

Spoiler

Tier 8 Power Ball

 

A Tier 8 Power Ball Can hold 9,223,372,036,854,775,807

To make a Tier 8 Power Ball you will need (Also to get the Awakened draconium blocks you will need to kill 95Dragons 

 

1 Energy core (Use the same as before if you skip Tier 1 just make a new one) 

36 Energy Core Stabilizers 

786 Draconium blocks 

378 Awakened Draconium block

 

After you have got all of these items, You have to brake ALL of the redstone from the inside and replace it with Draconium Block, Then after that you Cover all of the Draconium blocks with the Awakened draconium like you do with Draconium for redstone on other steps 

How to Input/Output

Spoiler

To Setup Input and Output Power you have to have a Energy Pylon, You can place it anywhere near the Stabliizers there is a limit to how far they will send power This is how you can just place one 

 

Next Step is to add Glass ontop or below they energy pylon and it will look like this 

 

Now that is there you can Add power into the ball by adding power on the Energy Pylon/ Flux points work

 

To export power all you do is right click the glass ontop, It will change Colour to orange and thats to export the power and you can connect it with what ever you want to take out power/ Flux plugs work

 

 

 

 

Thanks for reading  

Leave comments  

Towilloughby